UV light robots utilizing UVC germicidal lamps are in high demand in the fight against the spread of harmful bacteria and viruses, including the SARS-CoV-2 virus that causes COVID-19. Ultraviolet (UV) radiation emitted in the UVC wavelength is proven to have highly effective germicidal properties, quickly eradicating harmful pathogens on surfaces, in water and in the air.
UV sterilization systems have been utilized for decades such as in air treatment systems, water treatment plants, and many other applications where UV lamps are installed to disinfect surfaces. It is not unusual to see UV lamps in HVAC or wall mounted air treatment systems or positioned to sterilize surfaces such as medical and surgical equipment. Seeing a UVC robot roam the halls of public places, however, may seem like a scene out of a science fiction, futuristic movie.
Thanks to advances in technology and several studies verifying the effectiveness of UV lamps to kill the SARS-CoV-2 virus, the future is now with UV light robots gaining in popularity to disinfect surfaces in many different environments. Autonomous robots with UVC germicidal lamps installed to emit UVC radiation in all directions provide an effective tool to eliminate tough viruses and bacteria that manual cleaning procedures may have missed. UVC robots operate without humans present and can use sensors to detect motion to shut down if people are near. They can navigate rooms, hallways and find their way back to charging stations, all without being on the payroll or taking a lunch break.
UVC Robots a Common Sight in Many Environments
UVC light robots are becoming a common sight in many environments as people and businesses worldwide take proactive steps to reduce the spread of COVID-19. Hospitals and medical facilities are the main driver in the increased use of UVC robots although many other industries and environments are taking notice and using the same technology to protect their staff and the public.
Hospitals are known to be a source of infection with medical staff and administrators focused on preventing hospital acquired infections (HAIs) through meticulous sterilization procedures. Disinfecting hospital rooms where patients had a serious illness such as COVID-19 or any type of superbug like antibiotic-resistant bacterial infections is critical to protect all hospital patients and staff. UVC germicidal lamps have long been used in hospitals and medical facilities and are increasing in use in other environments.
UVC disinfection lamps and UV light robots are helping to protect people with effective sterilization in many industries and environments including:
- Hospitals and medical facilities
- Schools and college campuses
- Public stores and shopping malls
- Office buildings and manufacturers
- Restaurants and kitchens
- Public transportation systems
- Buses and bus stations
- Trains and train stations
- Airplanes and airports
UV light robots can be programmed to enter hospital rooms after manual cleaning procedures and significantly improve effective disinfection rates. UV disinfection is effective in a wide range of water, air and surface sterilization applications.
Effectiveness of UV Light Sterilization
According to a recent study by the National Institutes of Health, UVC disinfection robot, the effectiveness of UV light sterilization depends on several environmental factors such as surface topography, relative humidity, temperature, pH, organic load and other chemical compounds present. UVC germicidal lamps and UV light robots are proven 99.99% effective in reducing counts of vegetative bacteria within 15 minutes, including stubborn superbugs like MRSA, and even tougher pathogens like C. difficile within 50 minutes.
Since the COVID-19 pandemic began in 2020 several studies have been conducted on the effectiveness of UVC light to kill the SARS-CoV-2 virus, with highly effective eradication of the virus comparable to other coronaviruses. Severe Acute Respiratory Syndrome, also known as SARS, and Middle East respiratory syndrome (MERS) are both in the same coronavirus family. UVC light is proven effective at eliminating these coronaviruses as well as SARS-CoV-2, according to many recent research studies such as Upper-room ultraviolet air disinfection might help to reduce COVID-19 transmission in buildings: a feasibility study from October of 2020 by the National Institutes of Health (NIH).
UVC Germicidal Lamps for UV Light Robots
LightSources is a leading global supplier of UVC germicidal lamps for UVC light robots, offering a wide selection of high-quality germicidal lamps and custom engineering support. Our engineers possess deep technical knowledge of UV radiation and designing custom phosphor blends to meet your exact specifications. Our germicidal UVC lamps are proven in surface, water, and air sterilization applications, developed with proprietary technologies such as LongLife+™ and Shatter ProTech. LongLife+™ is a specialty coating that increases lamp life up to 16,000 hours, Shatter ProTech provides shatter resistance and protection from mercury contamination.
Our UV germicidal lamps include:
- Low Pressure Mercury Lamps
- Low Pressure Amalgam Lamps
- MPUVC germicidal lamps
- UV Quartz sleeves
- UVC Ozone lamps
- Custom bases and sockets
- Electronic Ballasts
LAMP PRODUCT DATA:UV Germicidal Lamps
LAMP Applications:UV Germicidal Applications
LightSources follows a strict quality policy as part of our ISO9001:2015 certification, dedicated to high-quality products with consistent, reliable performance. We offer custom design and prototype solutions, with UV lamps for robots and all types of sterilization systems. Contact us to learn more about our UVC germicidal lamp solutions including sterilization lamps for UV light robots.